3d print: enclosure with few printability and quality issues

[arekm]

Ordered the PCB from your shop and now playing with printing (as possibly perfect as I can) enclosure.

I've tried to print it using 0.2mm nozzle and 0.08mm layer (gray). Then 0.4mm nozzle and 0.08mm layer (black). To get nice surface when touching. Tests were done on bambu H2C and X1C with ASA (gray) and PETG (black). Mostly used 3mf file from #4 but with some tweaks.

Both were far from good (IMO).

The issue is mainly sharp corners (some tending to zero) and too steep overhangs.

Now looking into fusion file.

btw. Can we get proper fusion file with the development history included too? Would be awesome.

It lis beatiful in fusion but printability is another thing. I've marked things that could improve printability IMO. Also few cosmetic ones (inside 90 degree corners).

[behold81]

Did you make these changes at all and test them? Im about to print this out and I agree with these updates. I do not have fusion installed at the moment so would need to change them in onshape.

[relikd]

I do not have fusion installed at the moment so would need to change them in onshape.

or FreeCAD #36