TS0505B (_TZ3210_iystcadi): color changes no longer work

[ChrisSmartHome]

describe the changes between the device operation problem in Detail. What is the curernt state, what is the desired state ?

Desired state (behaviour on the previous adapter version):

Writing a color to the color state - as a named color (blue), as hex (#0000FF) or as RGB - puts the light into RGB mode and the light physically shows that color.
Writing to color_temp puts the light back into white mode with the requested color temperature. Switching back and forth between color and white works in both directions.

Current state (adapter 3.5.5):

Writing to the color state has no effect on the color of the light. The light stays in white mode; only the white tone changes. It never shows red, blue or any other color.
No error is logged and the operation is reported as SUCCESS, so from ioBroker's side the write appears to have succeeded.
On/off, brightness and color_temp still work normally. The problem is limited to the color state.

What changed:

Nothing on the device side - same hardware, same firmware, same pairing, no re-pairing in between. Only the adapter version changed. Downgrading restores working color control, upgrading breaks it again. No external converter is involved in either case; this is the built-in definition in both.

Device information (Type of the device, including the Z2M link to the device description page)

modelZigbee:TS0505B https://www.zigbee2mqtt.io/devices/14149505L_14149506L_2.html

Coordinator firmware version

20250321

Coordinator

Sonoff Zigbee 3.0 (ZStack3x0)

Setup

Proxmox Container

Current adapter version

3.5.5

Protocol of the error (as text, encapsulated in multiline code tags <>). Logs which are too big to be shown in the issue MUST be trimmed so that they fit, e.g. by removing duplicate warning messages.

No warning/error in console, but no effect. Color is not changing. This is the debug log:

zigbee.0 2026-08-17 11:23:48.102    warn    ELEVATED:I04 (c500) value generated 'true' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Switch state' 
zigbee.0 2026-08-17 11:23:48.101    warn    ELEVATED:I02.2a (c500) converter 2 : Cluster genOnOff 
zigbee.0 2026-08-17 11:23:52.596    warn    ELEVATED:SUCCESS (d607) convert result {"state":{"color_mode":"xy","color":{"x":0.7006,"y":0.2993}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' 
zigbee.0 2026-08-17 11:23:52.504    warn    ELEVATED:O05 (d607) Attempt 1 at converting data for color with preparedValue {"r":255,"g":0,"b":0}, meta.state {"state":"ON"}, meta.message {"color":{"r":255,"g":0,"b":0}} 
zigbee.0 2026-08-17 11:23:52.504    warn    ELEVATED:O04 (d607) convert color with value {"r":255,"g":0,"b":0} and options {"state":"ON","transition_time":8,"transition":8} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint 
zigbee.0 2026-08-17 11:23:52.503    warn    ELEVATED:Oo4.1 (d607) Overriding' converter to converter with key(s)'["color","color_temp","color_temp_percent"]} 
zigbee.0 2026-08-17 11:23:52.503    warn    ELEVATED:Os4.0 (d607) Setting' converter to converter with key(s)'["brightness","color","color_temp"]} 
zigbee.0 2026-08-17 11:23:52.500    warn    ELEVATED:O03 (d607) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color 
zigbee.0 2026-08-17 11:23:52.499    warn    ELEVATED:O02 (d607) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2' 
zigbee.0 2026-08-17 11:23:52.455    warn    ELEVATED:O01 (d607) User state change of state 
zigbee.0.60a423fffe70cc3d.color with value red (ack: false) from system.adapter.admin.0

Previous adapter version

3.3.5

Protocol of the error (as text, encapsulated in multiline code tags <>). Logs which are too big to be shown in the issue MUST be trimmed so that they fit, e.g. by removing duplicate warning messages.

in version 3.3.5 color change did work. This was the debug log:

zigbee.0 2026-08-17 11:21:16.751    warn    ELEVATED:SUCCESS (74e3) convert result {"state":{"color_mode":"hs","color":{"hue":240,"saturation":100}}} for device 0x60a423fffe70cc3d
zigbee.0 2026-08-17 11:21:16.570    warn    ELEVATED:O04 (74e3) convert color with value {"r":0,"g":0,"b":255} and options {"state":true,"transition_time":8,"transition":8} for device 0x60a423fffe70cc3d without Endpoint
zigbee.0 2026-08-17 11:21:16.566    warn    ELEVATED:O03 (74e3) Publishing to 0x60a423fffe70cc3d of model 14149505L/14149506L_2 with color
zigbee.0 2026-08-17 11:21:16.566    warn    ELEVATED:O02 (74e3) Change state 'color' at device 0x60a423fffe70cc3d type '14149505L/14149506L_2'
zigbee.0 2026-08-17 11:21:16.516    warn    ELEVATED:O01 (74e3) User state change of state zigbee.0.60a423fffe70cc3d.color with value blue (ack: false) from system.adapter.admin.0

mod Edit: Code Tags

[asgothian]

Please test: What happens if you set the color_hs.hue and color_hs.saturation DP's ?

Note - this is a change forced through the update of the ZHC Library. No relevant code was changed on the adapter, and the current device description clearly states that the device does not support RGB Colors, while previous versions did support color_rgb through an internal rgb to hsv conversion (ZHC internal, not adapter internal. I do not know why this was changed, b

There are multiple changes / updates / fixes listed both in ZHC and in zigbee2mqtt.io. All I could find was that the RGB support was removed as the device does not actually support it.

Reading the changelog.md file on ZHC, searching for TS0505B points towards the respective issues.

There is an update in the works which translates named colors to HSV values rather than RGB for devices which do not support rgb color. This update is about 4 to 8 weeks out before it can be tested though, as it is delayed behind a cleanup / code improvement task.

A.

[ChrisSmartHome]

Thx for the reply! Setting color_hs.hue and color_hs.saturation doesnt work either.
Is there anything I can do for now or better wait for the update?

Thx!!

[asgothian]

Thx for the reply! Setting color_hs.hue and color_hs.saturation doesnt work either. Is there anything I can do for now or better wait for the update?

Please provide the same debug log from when changing color_hs.hue and color_hs.saturation as you did before.

I may have access to a device coming week to see what is going on in a debugger.

A.

[ChrisSmartHome]

Sure!

Change in hue

zigbee.0 | 2026-08-19 13:50:17.476 | warn | ELEVATED:SUCCESS (99ea) convert result {"state":{"color_mode":"hs","color":{"hue":10,"saturation":100}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-19 13:50:17.369 | warn | ELEVATED:O05 (99ea) Attempt 1 at converting data for color with preparedValue {"hue":10,"saturation":100}, meta.state {"state":"ON"}, meta.message {"color":{"hue":10,"saturation":100}}
zigbee.0 | 2026-08-19 13:50:17.369 | warn | ELEVATED:O04 (99ea) convert color with value {"hue":10,"saturation":100} and options {"state":"ON","transition_time":1,"transition":1} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-19 13:50:17.369 | warn | ELEVATED:Oo4.1 (99ea) Overriding' converter to converter with key(s)'["color","color_temp","color_temp_percent"]}
zigbee.0 | 2026-08-19 13:50:17.369 | warn | ELEVATED:Os4.0 (99ea) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-19 13:50:17.366 | warn | ELEVATED:O03 (99ea) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-19 13:50:17.365 | warn | ELEVATED:O02 (99ea) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-19 13:50:17.322 | warn | ELEVATED:O01 (99ea) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":10,"saturation":100} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-19 13:50:12.275 | warn | ELEVATED:O02 (8607) Change state 'color_hs.hue' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-19 13:50:12.231 | warn | ELEVATED:O01 (8607) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.hue with value 10 (ack: false) from system.adapter.admin.0

Change in saturation

zigbee.0 | 2026-08-19 13:50:45.892 | warn | ELEVATED:SUCCESS (08d3) convert result {"state":{"color_mode":"hs","color":{"hue":10,"saturation":5}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-19 13:50:45.760 | warn | ELEVATED:O05 (08d3) Attempt 1 at converting data for color with preparedValue {"hue":10,"saturation":5}, meta.state {"state":"ON"}, meta.message {"color":{"hue":10,"saturation":5}}
zigbee.0 | 2026-08-19 13:50:45.760 | warn | ELEVATED:O04 (08d3) convert color with value {"hue":10,"saturation":5} and options {"state":"ON","transition_time":1,"transition":1} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-19 13:50:45.760 | warn | ELEVATED:Oo4.1 (08d3) Overriding' converter to converter with key(s)'["color","color_temp","color_temp_percent"]}
zigbee.0 | 2026-08-19 13:50:45.760 | warn | ELEVATED:Os4.0 (08d3) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-19 13:50:45.758 | warn | ELEVATED:O03 (08d3) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-19 13:50:45.758 | warn | ELEVATED:O02 (08d3) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-19 13:50:45.715 | warn | ELEVATED:O01 (08d3) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":10,"saturation":5} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-19 13:50:40.668 | warn | ELEVATED:O02 (f4f0) Change state 'color_hs.saturation' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-19 13:50:40.624 | warn | ELEVATED:O01 (f4f0) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.saturation with value 5 (ack: false) from system.adapter.admin.0

[asgothian]

can you please generate the same logs in 3.3.5 ?

A.

[ChrisSmartHome]

Yes :)

Change in hue

zigbee.0 | 2026-08-20 08:25:04.843 | warn | ELEVATED:SUCCESS (3896) convert result {"state":{"color_mode":"hs","color":{"hue":200,"saturation":90}}} for device 0x60a423fffe70cc3d
zigbee.0 | 2026-08-20 08:25:04.706 | warn | ELEVATED:O04 (3896) convert color with value {"hue":200,"saturation":90} and options {"state":true,"transition_time":1,"transition":1} for device 0x60a423fffe70cc3d without Endpoint
zigbee.0 | 2026-08-20 08:25:04.706 | warn | ELEVATED:O03 (3896) Publishing to 0x60a423fffe70cc3d of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-20 08:25:04.706 | warn | ELEVATED:O02 (3896) Change state 'color' at device 0x60a423fffe70cc3d type '14149505L/14149506L_2'
zigbee.0 | 2026-08-20 08:25:04.662 | warn | ELEVATED:O01 (3896) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":200,"saturation":90} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-20 08:24:59.547 | warn | ELEVATED:O02 (2470) Change state 'color_hs.hue' at device 0x60a423fffe70cc3d type '14149505L/14149506L_2'
zigbee.0 | 2026-08-20 08:24:59.504 | warn | ELEVATED:O01 (2470) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.hue with value 200 (ack: false) from system.adapter.admin.0

Change in saturation

zigbee.0 | 2026-08-20 08:24:31.105 | warn | ELEVATED:SUCCESS (b49b) convert result {"state":{"color_mode":"hs","color":{"hue":300,"saturation":90}}} for device 0x60a423fffe70cc3d
zigbee.0 | 2026-08-20 08:24:30.918 | warn | ELEVATED:O04 (b49b) convert color with value {"hue":300,"saturation":90} and options {"state":true,"transition_time":1,"transition":1} for device 0x60a423fffe70cc3d without Endpoint
zigbee.0 | 2026-08-20 08:24:30.917 | warn | ELEVATED:O03 (b49b) Publishing to 0x60a423fffe70cc3d of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-20 08:24:30.917 | warn | ELEVATED:O02 (b49b) Change state 'color' at device 0x60a423fffe70cc3d type '14149505L/14149506L_2'
zigbee.0 | 2026-08-20 08:24:30.875 | warn | ELEVATED:O01 (b49b) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":300,"saturation":90} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-20 08:24:25.768 | warn | ELEVATED:O02 (a07b) Change state 'color_hs.saturation' at device 0x60a423fffe70cc3d type '14149505L/14149506L_2'
zigbee.0 | 2026-08-20 08:24:25.723 | warn | ELEVATED:O01 (a07b) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.saturation with value 90 (ack: false) from system.adapter.admin.0

[asgothian]

Thank you for the Logs. I think I have pinpointed what is happening. Working against this may not be as easy though - this will need to wait until I am back home and can run more tests and also speak with the people responsible for the ZHC library.

A.

[asgothian]

I tried to implement an ugly quick-fix. Can you test if this solves the issue ? It would confirm that I am on the right track, even if this may not be the final implementation.

In order to test this, do the following:

• install from my GitHub at https://github.com/asgothian/ioBroker.zigbee - this should give you the 3.5.5 with 2 patches.
• go to the local config for the device and add the option first_converter with the value true to the model.

Note - no restart is required to activate this option.

Let me know if this allows for you to control the light using the Hue/Saturation method.

A.

p.s. here;s a screenshot for the local config:

[ChrisSmartHome]

I tried, but got an error and the led did not change

setting hue:

zigbee.0 | 2026-08-21 09:03:28.258 | warn | ELEVATED:EXSET (bad0) caught error Cannot read properties of undefined (reading 'h') when setting value for device 'ComputerAmbilight (0x60a423fffe70cc3d)' (TypeError: Cannot read properties of undefined (reading 'h') at Object.convertSet (/opt/iobroker/node_modules/zigbee-herdsman-converters/dist/lib/tuya.js:2897:60) at ZigbeeController.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:1689:54)).
zigbee.0 | 2026-08-21 09:03:28.258 | error | Send command to 0x60a423fffe70cc3d failed with no error code (undefined) - repeats are counted, not logged (errors view in the admin tab)
zigbee.0 | 2026-08-21 09:03:28.257 | warn | ELEVATED:O05 (bad0) Attempt 1 at converting data for color with preparedValue {"hue":232,"saturation":100}, meta.state {"state":"ON"}, meta.message {"color":{"hue":232,"saturation":100}}
zigbee.0 | 2026-08-21 09:03:28.256 | warn | ELEVATED:O04 (bad0) convert color with value {"hue":232,"saturation":100} and options {"first_converter":"true","state":"ON","transition_time":1,"transition":1} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-21 09:03:28.256 | warn | ELEVATED:Os4.0 (bad0) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-21 09:03:28.254 | warn | ELEVATED:O03 (bad0) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-21 09:03:28.253 | warn | ELEVATED:O02 (bad0) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-21 09:03:28.208 | warn | ELEVATED:O01 (bad0) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":232,"saturation":100} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-21 09:03:23.200 | warn | ELEVATED:O02 (a715) Change state 'color_hs.hue' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-21 09:03:23.157 | warn | ELEVATED:O01 (a715) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.hue with value 232 (ack: false) from system.adapter.admin.0

setting saturation:

zigbee.0 | 2026-08-21 09:05:12.444 | warn | ELEVATED:EXSET (51cc) caught error Cannot read properties of undefined (reading 'h') when setting value for device 'ComputerAmbilight (0x60a423fffe70cc3d)' (TypeError: Cannot read properties of undefined (reading 'h') at Object.convertSet (/opt/iobroker/node_modules/zigbee-herdsman-converters/dist/lib/tuya.js:2897:60) at ZigbeeController.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:1689:54)).
zigbee.0 | 2026-08-21 09:05:12.444 | warn | ELEVATED:O05 (51cc) Attempt 1 at converting data for color with preparedValue {"hue":232,"saturation":90}, meta.state {"state":"ON"}, meta.message {"color":{"hue":232,"saturation":90}}
zigbee.0 | 2026-08-21 09:05:12.444 | warn | ELEVATED:O04 (51cc) convert color with value {"hue":232,"saturation":90} and options {"first_converter":"true","state":"ON","transition_time":1,"transition":1} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-21 09:05:12.443 | warn | ELEVATED:Os4.0 (51cc) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-21 09:05:12.442 | warn | ELEVATED:O03 (51cc) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-21 09:05:12.442 | warn | ELEVATED:O02 (51cc) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-21 09:05:12.396 | warn | ELEVATED:O01 (51cc) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":232,"saturation":90} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-21 09:05:07.332 | warn | ELEVATED:O02 (3dd8) Change state 'color_hs.saturation' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-21 09:05:07.288 | warn | ELEVATED:O01 (3dd8) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.saturation with value 90 (ack: false) from system.adapter.admin.0

[asgothian]

There seems to be something fishy in the converter / herdsman. Please run the following test:

• add the option meta_state with the value brightness to the device or model
• ensure that the CT of the device is 'warm' (i.e. an orange hue)
• try to set the hue of the device.
• note down what the converter returns, i.e. this line from the elevated logs ELEVATED:SUCCESS (b49b) convert result {"state":{"color_mode":"hs","color":{"hue":300,"saturation":90}}} for device 0x60a423fffe70cc3d
• check the device itself. it should have moved to a pinkish hue, as proof that it switched to color_mode hs.

I will go ahead and open an issue at the ZHC - something is clearly wrong there.

A.

[ChrisSmartHome]

Hello,

I did add the meta_state while first_converter was still set to true as well as with first_converter removed from attributes.
Both did switch to pink when changing to {"hue":300,"saturation":90}. Cool, thx!!

Adapter | Time | debug | Message
-- | -- | -- | --
zigbee.0 | 2026-08-28 14:44:03.048 | warn | ELEVATED:SUCCESS (0de2) convert result {"state":{"color_mode":"hs","color":{"hue":300,"saturation":90}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-28 14:44:02.962 | warn | ELEVATED:O05 (0de2) Attempt 1 at converting data for color with preparedValue {"hue":300,"saturation":90}, meta.state {"brightness":254,"state":"ON"}, meta.message {"color":{"hue":300,"saturation":90}}
zigbee.0 | 2026-08-28 14:44:02.962 | warn | ELEVATED:O04 (0de2) convert color with value {"hue":300,"saturation":90} and options {"first_converter":"true","meta_state":"brightness","state":"ON","transition_time":1,"transition":1} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-28 14:44:02.961 | warn | ELEVATED:Oo4.1 (0de2) Overriding' converter to converter with key(s)'["color","color_temp","color_temp_percent"]}
zigbee.0 | 2026-08-28 14:44:02.960 | warn | ELEVATED:Os4.0 (0de2) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-28 14:44:02.959 | warn | ELEVATED:O03 (0de2) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-28 14:44:02.958 | warn | ELEVATED:O02 (0de2) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-28 14:44:02.915 | warn | ELEVATED:O01 (0de2) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":300,"saturation":90} (ack: false) from system.adapter.admin.0

Interestingly, when changing brightness it still switches back to white color mode

Adapter | Time | debug | Message
-- | -- | -- | --
zigbee.0 | 2026-08-28 14:46:54.931 | warn | ELEVATED:I04 (adcc) value generated 'true' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Switch state'
zigbee.0 | 2026-08-28 14:46:54.931 | warn | ELEVATED:I03 (adcc) message received '{"state":"ON"}' from device 'ComputerAmbilight (60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-28 14:46:54.931 | warn | ELEVATED:I02.2d (adcc) candidates: [{"state":"ON"},{"state":"ON"}] => payload {"state":"ON"} => processed payload : {"state":"ON"}
zigbee.0 | 2026-08-28 14:46:54.931 | warn | ELEVATED:I02.1b (adcc) data: {"onOff":1} options: {"first_converter":"true","meta_state":"brightness"} meta:{"deviceIEEE":"0x60a423fffe70cc3d","logger":"StatesController","state":{"brightness":188,"state":""}} result:{"state":"ON"}
zigbee.0 | 2026-08-28 14:46:54.930 | warn | ELEVATED:I02.2a (adcc) converter 2 : Cluster genOnOff
zigbee.0 | 2026-08-28 14:46:54.930 | warn | ELEVATED:I02.0b (adcc) data: {"onOff":1} options: {"first_converter":"true","meta_state":"brightness"} meta:{"deviceIEEE":"0x60a423fffe70cc3d","logger":"StatesController","state":{"brightness":188,"state":""}} result:{"state":"ON"}
zigbee.0 | 2026-08-28 14:46:54.930 | warn | ELEVATED:I02.1a (adcc) converter 1 : Cluster genOnOff
zigbee.0 | 2026-08-28 14:46:54.930 | warn | ELEVATED:I02 (adcc) 2 converters available for '14149505L/14149506L_2' 'ComputerAmbilight (60a423fffe70cc3d)' with cluster 'genOnOff' and type 'readResponse'
zigbee.0 | 2026-08-28 14:46:54.929 | warn | ELEVATED:I04 (adcc) value generated '54' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Link quality'
zigbee.0 | 2026-08-28 14:46:54.926 | warn | ELEVATED:I04 (adcd) value generated 'true' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Available'
zigbee.0 | 2026-08-28 14:46:54.925 | warn | ELEVATED:I03 (adcd) message received '{"available":true}' from device 'ComputerAmbilight (60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-28 14:46:54.925 | warn | ELEVATED:I01 (adcc) Zigbee Event of Type readResponse from device 'ComputerAmbilight (0x60a423fffe70cc3d)', incoming event: {"type":"readResponse","data":{"onOff":1},"linkquality":54,"groupID":0,"cluster":"genOnOff","meta":{"rawData":{"type":"Buffer","data":[24,115,1,0,0,0,16,1]},"zclTransactionSequenceNumber":115,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1}
zigbee.0 | 2026-08-28 14:46:53.639 | warn | ELEVATED:SUCCESS (a81f) convert result {"state":{"brightness":188,"state":"ON"}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-28 14:46:53.517 | warn | ELEVATED:O05 (a81f) Attempt 1 at converting data for brightness with preparedValue 188, meta.state {"brightness":188,"state":"ON"}, meta.message {"brightness":188}
zigbee.0 | 2026-08-28 14:46:53.516 | warn | ELEVATED:O04 (a81f) convert brightness with value 188 and options {"first_converter":"true","meta_state":"brightness","state":"ON","transition":1,"brightness":188} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-28 14:46:53.516 | warn | ELEVATED:Oo4.1 (a81f) Overriding' converter to converter with key(s)'["state","brightness","brightness_percent","on_time","off_wait_time"]}
zigbee.0 | 2026-08-28 14:46:53.516 | warn | ELEVATED:Os4.0 (a81f) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-28 14:46:53.514 | warn | ELEVATED:O03 (a81f) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with brightness
zigbee.0 | 2026-08-28 14:46:53.513 | warn | ELEVATED:O02 (a81f) Change state 'brightness' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-28 14:46:53.471 | warn | ELEVATED:O01 (a81f) User state change of state zigbee.0.60a423fffe70cc3d.brightness with value 74 (ack: false) from system.adapter.matter.0

[asgothian]

Please test:

• set the color to a desired color, using the color_hs.hue and color_hs.saturation DPs
• cut the power to the device
• turn the device back on.

In this state, you should be able to control the color freely using the above DP;s

I am aware that this is not a solution - this is just to verify the device behaviour

A.

[asgothian]

There is another thing to test. I did some finangling in the adapter:

1. please install from GitHub (here: https://github.com/asgothian/ioBroker.zigbee ) - yes you installed from there before, but i added code changes
2. reconfigure the device (using the send_payload state, write reconfigure to trigger reconfiguration. Alternatively, do that from the device tile.
3. set the following options- first_converter (true)

• store_colormode (true)
• meta_state (color)
• meta_message (brightness)

3. try to control the color using hue/saturation.

Note that there is a bug still there - hue 0 saturation 0 should be red - it is green due to an error in the converter. This still needs to be fixed, but that may take some time.

There are also parametersets which will result in green light. e.g. having hue 10, saturation 10 - it is an indicator for values the device cant actually display.

I may generate an external converter for you which will accept RGB colors too. But that will take a few days, and i wont start until i got confirmation that this does work.

A.

[ChrisSmartHome]

Hello & thx!

color change does work:

zigbee.0 | 2026-08-31 08:22:33.619 | warn | ELEVATED:SUCCESS (ddb4) convert result {"state":{"color_mode":"hs","color":{"hue":101,"saturation":100}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-31 08:22:33.443 | warn | ELEVATED:O05 (ddb4) Attempt 1 at converting data for color with preparedValue {"hue":101,"saturation":100}, meta.state {"color":{"hue":101,"saturation":100},"brightness":254,"state":"ON"}, meta.message {"color":{"hue":101,"saturation":100},"brightness":254}
zigbee.0 | 2026-08-31 08:22:33.442 | warn | ELEVATED:O04 (ddb4) convert color with value {"hue":101,"saturation":100} and options {"meta_state":"color","color_sync":"true","first_converter":"true","meta_message":"brightness","state":"ON","transition":0} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-31 08:22:33.442 | warn | ELEVATED:Os4.0 (ddb4) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-31 08:22:33.440 | warn | ELEVATED:O03 (ddb4) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with color
zigbee.0 | 2026-08-31 08:22:33.439 | warn | ELEVATED:O02 (ddb4) Change state 'color' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:22:33.396 | warn | ELEVATED:O01 (ddb4) User state change of state zigbee.0.60a423fffe70cc3d.color with value {"hue":101,"saturation":100} (ack: false) from system.adapter.zigbee.0
zigbee.0 | 2026-08-31 08:22:32.803 | warn | ELEVATED:O02 (db0d) Change state 'color_hs.saturation' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:22:32.759 | warn | ELEVATED:O02 (db09) Change state 'color_hs.hue' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:22:32.718 | warn | ELEVATED:O01 (db0d) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.saturation with value 100 (ack: false) from system.adapter.matter.0
zigbee.0 | 2026-08-31 08:22:32.714 | warn | ELEVATED:O01 (db09) User state change of state zigbee.0.60a423fffe70cc3d.color_hs.hue with value 101 (ack: false) from system.adapter.matter.0

When changing brightness, it always resets to color green but brightness stays the same:

zigbee.0 | 2026-08-31 08:24:08.381 | warn | ELEVATED:I04 (50b7) value generated 'true' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Switch state'
zigbee.0 | 2026-08-31 08:24:08.380 | warn | ELEVATED:I03 (50b7) message received '{"state":"ON"}' from device 'ComputerAmbilight (60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:24:08.380 | warn | ELEVATED:I02.2d (50b7) candidates: [{"state":"ON"},{"state":"ON"}] => payload {"state":"ON"} => processed payload : {"state":"ON"}
zigbee.0 | 2026-08-31 08:24:08.380 | warn | ELEVATED:I02.1b (50b7) data: {"onOff":1} options: {"meta_state":"color","color_sync":"true","first_converter":"true","meta_message":"brightness"} meta:{"deviceIEEE":"0x60a423fffe70cc3d","logger":"StatesController","state":{"color":{"hue":101,"saturation":100},"brightness":254,"state":""}} result:{"state":"ON"}
zigbee.0 | 2026-08-31 08:24:08.380 | warn | ELEVATED:I02.2a (50b7) converter 2 : Cluster genOnOff
zigbee.0 | 2026-08-31 08:24:08.380 | warn | ELEVATED:I02.0b (50b7) data: {"onOff":1} options: {"meta_state":"color","color_sync":"true","first_converter":"true","meta_message":"brightness"} meta:{"deviceIEEE":"0x60a423fffe70cc3d","logger":"StatesController","state":{"color":{"hue":101,"saturation":100},"brightness":254,"state":""}} result:{"state":"ON"}
zigbee.0 | 2026-08-31 08:24:08.379 | warn | ELEVATED:I02.1a (50b7) converter 1 : Cluster genOnOff
zigbee.0 | 2026-08-31 08:24:08.379 | warn | ELEVATED:I02 (50b7) 2 converters available for '14149505L/14149506L_2' 'ComputerAmbilight (60a423fffe70cc3d)' with cluster 'genOnOff' and type 'readResponse'
zigbee.0 | 2026-08-31 08:24:08.378 | warn | ELEVATED:I04 (50b7) value generated '25' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Link quality'
zigbee.0 | 2026-08-31 08:24:08.376 | warn | ELEVATED:I04 (50b8) value generated 'true' from device 'ComputerAmbilight (60a423fffe70cc3d)' for 'Available'
zigbee.0 | 2026-08-31 08:24:08.376 | warn | ELEVATED:I03 (50b8) message received '{"available":true}' from device 'ComputerAmbilight (60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:24:08.375 | warn | ELEVATED:I01 (50b7) Zigbee Event of Type readResponse from device 'ComputerAmbilight (0x60a423fffe70cc3d)', incoming event: {"type":"readResponse","data":{"onOff":1},"linkquality":25,"groupID":0,"cluster":"genOnOff","meta":{"rawData":{"type":"Buffer","data":[24,4,1,0,0,0,16,1]},"zclTransactionSequenceNumber":4,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1}
zigbee.0 | 2026-08-31 08:24:07.328 | warn | ELEVATED:SUCCESS (4b98) convert result {"state":{"color_mode":"hs","color":{"hue":142,"saturation":39}}} for device 'ComputerAmbilight (0x60a423fffe70cc3d)'
zigbee.0 | 2026-08-31 08:24:07.111 | warn | ELEVATED:O05 (4b98) Attempt 1 at converting data for brightness with preparedValue 68, meta.state {"color":{"hue":101,"saturation":100},"brightness":254,"state":"ON"}, meta.message {"brightness":68}
zigbee.0 | 2026-08-31 08:24:07.111 | warn | ELEVATED:O04 (4b98) convert brightness with value 68 and options {"meta_state":"color","color_sync":"true","first_converter":"true","meta_message":"brightness","state":"ON","brightness":68} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-31 08:24:07.110 | warn | ELEVATED:Os4.0 (4b98) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-31 08:24:07.108 | warn | ELEVATED:O03 (4b98) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with brightness
zigbee.0 | 2026-08-31 08:24:07.108 | warn | ELEVATED:O02 (4b98) Change state 'brightness' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:24:07.064 | warn | ELEVATED:O01 (4b98) User state change of state zigbee.0.60a423fffe70cc3d.brightness with value 27 (ack: false) from system.adapter.matter.0

Changing colortemp results in an error:

zigbee.0 | 2026-08-31 08:25:59.736 | warn | ELEVATED:EXSET (038b) caught error 'color_temp' is not a number, got string (142) when setting value for device 'ComputerAmbilight (0x60a423fffe70cc3d)' (Error: 'color_temp' is not a number, got string (142) at Object.assertNumber (/opt/iobroker/node_modules/zigbee-herdsman-converters/dist/lib/utils.js:614:15) at Object.convertSet (/opt/iobroker/node_modules/zigbee-herdsman-converters/dist/lib/tuya.js:2888:23) at ZigbeeController.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:1689:54)).
zigbee.0 | 2026-08-31 08:25:59.736 | error | Send command to 0x60a423fffe70cc3d failed with no error code (undefined) - repeats are counted, not logged (errors view in the admin tab)
zigbee.0 | 2026-08-31 08:25:59.735 | warn | ELEVATED:O05 (038b) Attempt 1 at converting data for color_temp with preparedValue "142", meta.state {"color":{"hue":101,"saturation":100},"brightness":254,"state":"ON"}, meta.message {"color_temp":"142","brightness":254}
zigbee.0 | 2026-08-31 08:25:59.735 | warn | ELEVATED:O04 (038b) convert color_temp with value "142" and options {"meta_state":"color","color_sync":"true","first_converter":"true","meta_message":"brightness","state":"ON"} for device 'ComputerAmbilight (0x60a423fffe70cc3d)' without Endpoint
zigbee.0 | 2026-08-31 08:25:59.735 | warn | ELEVATED:Os4.0 (038b) Setting' converter to converter with key(s)'["brightness","color","color_temp"]}
zigbee.0 | 2026-08-31 08:25:59.733 | warn | ELEVATED:O03 (038b) Publishing to 'ComputerAmbilight (0x60a423fffe70cc3d)' of model 14149505L/14149506L_2 with colortemp
zigbee.0 | 2026-08-31 08:25:59.733 | warn | ELEVATED:O02 (038b) Change state 'colortemp' at device 'ComputerAmbilight (0x60a423fffe70cc3d)' type '14149505L/14149506L_2'
zigbee.0 | 2026-08-31 08:25:59.691 | warn | ELEVATED:O01 (038b) User state change of state zigbee.0.60a423fffe70cc3d.colortemp with value 7042 (ack: false) from system.adapter.matter.0