This repository contains the code for the LOLIN (WEMOS) D1 mini Lite (ESP8266) Wordclock offered by FabLab Bern: WordClock-Worshop @ FabLab Bern
Generate custom clockface: SVG-Generator
The web interface is automatically generated from the Frontend using Grunt and embedded in web_interface.h:
cd Frontend
yarn install # (only required on first run)
yarn grunt # Compiles Frontend and updates web_interface.hAfter running yarn grunt, the file Backend/Arduino_Berndeutsch_121/web_interface.h is automatically updated and ready to compile with the Arduino IDE.
Hardware required:
| Anz | Element | Bemerkungen | Preis |
|---|---|---|---|
| 1 | IKEA SANNAHED Bilderrahmen | 25x25cm schwarz | 10.00 |
| 1 | Glasscheibe 25x25cm | 10.00 | |
| 1 | Hartfaserplatte 25x25cm | 1.00 | |
| 1 | Diffusor | LGT075J | 1.00 |
| 1 | Raster | 3D-Druck | 3.00 |
| 1 | Wemos D1 mini V4.0 USB C | 2.00 | |
| 0.5 | LED RGB NeoPixel Stripe | 5m, 60LED/m, IP30, not waterproove, white PCB | 9.00 |
| 1 | Kondensator 10V 1000µF | 0.30 | |
| 1 | Widerstand 470 Ohm | 0.05 | |
| 1 | USB-Kabel | 2m | 2.00 |
| 0.5 | Lötzinn | 2.00 | |
| 2.25m | Kupferlitze | 3x75cm rot/blau/schwarz pro Uhr | 1.00 |
| 10cm | Schrumpfschlauch | 2mm | |
| 1 | Controller-Mount | ||
| 1 | Cable-Mount | ||
| 0.5 | Farbspray | ||
| x | Lötkolben | ||
| x | Schmirgelpapier | 1.00 | |
| x | Schleifklotz | ||
| x | Weissleim | ||
| x | Heissleim | ||
| x | Klebband |
