Skip to content

About

A bash script to simplify the process of connecting to devices using adb (Android Debug Bridge).

Resources

Stars

1 star

Watchers

1 watching

Forks

Latest commit

 

History

3 Commits

Folders and files

Repository files navigation

adb-easy-connect

adb-easy-connect.sh simplifies connecting to an Android device over wireless ADB, allowing you to connect without manually entering a port. Instead of looking up the phone's current IP address manually, the script resolves it from the phone's MAC address. It can also automatically determine the active port on your phone and connect to it with adb.

Requirements

Initial Android Setup

For the initial wireless ADB setup, you need to pair your phone with your computer once:

  1. Enable Developer Options on the device.
  2. Follow Google's wireless debugging pairing steps for Android 11+: https://developer.android.com/tools/adb#wireless-android11-command-line
  3. After pairing, enable the Quick Settings developer tiles for Wireless debugging: https://developer.android.com/studio/debug/dev-options#general

After that initial setup, you can forget the manual pairing workflow and just use this script to reconnect.

Configuration

The script expects an adb_config.txt file in the same directory. It must contain the device MAC address.

An example is included in adb_config_sample.txt:

MAC_ADDRESS='xx:xx:xx:xx:xx:xx'

Copy it to adb_config.txt and replace the placeholder with your phone's MAC address.

If IP_ADDRESS is not present in the config, the script will use arp-scan to find the device on the network and update the config automatically.

Usage

Typical workflow:

  1. Enable Wireless debugging on your phone using the Developer Options quick settings tile.
  2. Run ./adb-easy-connect.sh on your computer.
  3. Use the ADB connection for whatever you need. I mostly use the following tools: scrcpy or better-adb-sync.
  4. Disconnect with ./adb-easy-connect.sh -d.
  5. Disable the Wireless debugging tile again.
./adb-easy-connect.sh

I highly recommend installing nmap and using ./adb-easy-connect.sh -s, because the wireless debugging port changes after each phone restart. With nmap, the script scans for the active port automatically, so you never have to type a port again.

If you do not want to use nmap, you will have to open the Wireless debugging settings on the phone and enter the current port after each restart.

After connecting through a changed port once, the script switches the device back to the standard ADB TCP port 5555.

Options

  • -d Disconnect from ADB
  • -s Scan the device for open ADB ports with nmap
  • -i <ip> Use a specific IP address instead of scanning
  • -h, --help Show the help message

Examples

./adb-easy-connect.sh
./adb-easy-connect.sh -d
./adb-easy-connect.sh -s
./adb-easy-connect.sh -i 192.168.1.2

About

A bash script to simplify the process of connecting to devices using adb (Android Debug Bridge).

Resources

Stars

1 star

Watchers

1 watching

Forks

Releases

Packages

Contributors

Languages