notes.txt

/**************************************/
/* This file is for personal use only */
/**************************************/

https://www.softicons.com/web-icons/web-grey-buttons-by-axialis-team
https://www.softicons.com/web-icons/circular-icons-by-pro-theme-design/
https://www.softicons.com/system-icons/web0.2ama-icons-by-chrfb/
https://www.veryicon.com/
https://www.iconbolt.com/
https://www.freepik.com/

https://community.shelly.cloud/forum/94-qa-group/

https://coolors.co/
https://www.w3schools.com/colors/colors_picker.asp

https://kb.shelly.cloud/knowledge-base/

//-D"org.slf4j.simpleLogger.log.it.usna=debug" -D"org.slf4j.simpleLogger.showDateTime=true"

http://192.168.1.xxx/rpc/Shelly.ListMethods


//0.5.5
// aggiunto Plug
// riscontro "restricted login" e "wi-fi bu" come per backup
// errore cloud per alcuni dispositivi (motion)

//0.6.0
//stato dispositivi (on-line, off-line, login, reading, error)
//colonna "nome"
//doppio click "Full device info" (non su command)
//login al singolo dispositivi protetto
//edit fine rgbw
//duo
//i3
//print table

//0.6.1
//flood

//0.7.0
//refresh parallelo continuo
//shelly 2, UNI
//export CSV

//0.7.2
//nome colonna stato (csv)
//restore mqtt (no pwd)
//doppia scheda di rete (Luk McFagnan)
//settings
// -localscan
//supporto parziale plus
//flag "defaul" su mqtt prefix

//0.7.3
//separazione fill status - file settings (che potrebbe essere chiamato meno)
//ShellyBulb
//supporto parziale

//0.7.4
//script G2
//filtro per nome
//selezione colonne
//posizione colonne
//3EM

//0.8.0
// miglioramenti fw update
// copy hostname
// copy mac address
// copy cell
// col SSID
//colonna misure

//0.8.1
// addon temperatura 1, 1PM
// colonna MAC
// sliders migliorati
// --- alpha2
// errore MQTT settings G1 multipli
// errore poco frequente restore null -> "null"
// restore restricted login
// restore wi-fi2
// link a manuale e download da [?]

//0.8.2
//add column - MQTT enabled
//add column - source
//default tabella non tutte le colonne
//optionally allow users to write credentials on application settings
//full scan default
//DialogDeviceInfo refresh
//+2PM
//restore + improved
//backup progress
//detailed info improvement for battery operated devices (some stored info shows when offline; experimental only on button 1)

//0.8.3
//Motion
//lettura conf disp batteria
//conservare i parametri della tabella ed eventualmente ripristinarli su cancel (dialog app settings)
//esclusione dei dispositivi non pertinenti/offline sui settaggi globali
//backup con stored data
//global settings "enable" disabilitato durante "show()

//0.8.4 beta
// H&T
// i4 (parziale)
// miglioramento restore (delay)
// [+] detailed view
//--- beta2
// sistemata altezza righe al ritorno dalla vista dettagliata

//0.8.5
// i4
// IP scan
// sort IP
// Ottimizzazione // final ObjectMapper mapper = new ObjectMapper(); condiviso
// bug: mqtt no pwd

//0.8.6
// stato input
// fw update - selection buttons / counters
// mqtt -copy 
// wifi2 - copy
// ^S combo change selection

//0.8.7
// fw update su tre colonne
// wi-fi 1
// restore script da backup
// mqtt status: connected
// chk table (blt, eco mode, led, AP, logs, ...)
// mqtt specific G2 settings

//0.8.8
// TRV
// ultima connessione (tooltip off-line)
// edit rgbw2 white

//0.9.0
// charts
// pro2 - pro2pm
// V on 2.5

//0.9.1 (alpha only)
// org.apache.httpcomponents.client5 -> org.eclipse.jetty (https://www.eclipse.org/jetty/documentation/jetty-11/programming-guide/index.html)
// Riconosciuti i tipi per i dispositivi protetti
// pro4PM (parziale)
// plus plug IT

//0.9.3
// org.java-websocket -> org.eclipse.jetty.websocket)
// Riconosciuti i tipi per i dispositivi protetti
// Recover generic - error
// pro4PM - pro1 - pro1pm - pro3 (full)
// pro2 - pro2pm (full)
// plus plug IT/US
// device info
// Enhanced FW update dialog

//0.9.5
// plus H&T
// wall dimmer
// Shelly Smoke
// rebootRequired
// checklist: number of devices connected to range extender
// extender WiFi.ListAPClients

//0.9.6
// range extender connected devices
// corretto errore pannello restricted login
// prestazioni (info letto solo una volta)

//0.9.7 no stable
// new selectors
// motion 2, plug plus S - UK
// checklist
// fix restore +IT +US
// fix export csv charts
// Shelly Pro 1PM (was 4pm) - pull request

//0.9.8
// add-on gen 2
// bug fix for plus 1PM
// Power shown on Shelly 1 (if edited: IP/settings/power/0?power=x)
// reload - contextual menu
// /rpc/KVS.List
// BLE - OBS

//1.0.0
// separazione type / hostname
// filtro full (type, hostname, mac, ip, name, command (LabelHolder)) - name - mac - ip
// archivio (additivo) dispositivi collegati opzionalmente caricabile
// button "verify new version"
// java 17
// offline scan mode
// add-on names
// Shelly +2PM reboot after enabled restricted login to see logs
// backup non interattivo

1.0.1
// devices notes
// reload ghosts
// KVS restore (gen2)
// Scripts and KVS
// timeouts tuning
// releases auto check
// optionally automatic reload for ghost devices (not battery operated) after 90 seconds the application has started (to be sure any timeout has expired and mDNS notified for any known device). This last idea is thanks to discussions with you.
// UNI measures/restore
// vertical charts export
// -graphs

1.0.2
// extended view -> store column selection/column position
// multi-selection contextual menu
// warning delete on notes
// device info auto-update on device going to "on line"
// backup/restore for offline/ghost devices
// fix restore +H&T
// pon_wifi_reset (gen1) - "power on"
// CoIoT info (cit/d) in "full device info"
// CoIoT restore
// fw updates per off-line
// optional captions on toolbar
// graphs: Temperatures (all)
// graphs: select one from series
// graphs: sum W
// graphs: zoom (selection / wheel)
// status on deferred button + number of waiting

1.0.3
// bug fix on KVS panel
// bug fix on graphs (equal names)
// mini 1, mini 1pm (partial), mini pm (partial)
// mqtt deferrable (all)
// login deferrable
// help on checklist & graphs
// fw update "any"
// motion 1/2 temperature
// restore degli script

1.0.5
// mini gen 3
// improved editor
// motion 2 improved restore (actions) and table output (motion on/off)

1.0.6
// IDE: tab - autoindent - autoclose - autocomplete - dark mode - matching brackets - block comments ...
// app settings IDE
// wall display basic support
// uptime "up from" + settings mode
// multi ip scan
// fix: jetty 12.0.5 -> 12.0.7 error on websocket
// scripts saveAs

1.0.7
Shelly.GetDeviceInfo (ident) - http://<IP>/rpc/Shelly.GetDeviceInfo?ident=true
NTP server address (also deferrable)
Cloud enable/disable (also deferrable)
ntp server added to restore
Wall Display better support
New checklist UI

1.1.0
Shelly 1 G3
Shelly 1PM G3
Shelly i4 G3
Shelly Plus Dimmer 0-10
Shelly Dimmer 0/1-10 G3
Shelly DIMMER 1 PRO
Shelly X MOD1 (measures from beta2)
Keyword column - (second field on notes)
Default filter 
range extender enable restore
addon config restore improved (3 steps)
dht22 restore fix
virtual & bthome comonents restore (bthome not added)

1.1.1
Input reset configuration
Shelly Pro EM-50
Shelly Plus RGBW
Shelly 2PM G3
Shelly plus 1PM - Shelly plus 2PM - Shelly 1PM G3 - 24V DC
improved miniPM & miniPMG3 restore
bug fix rgbw2
charts scroll

1.2.0
BLU (BTHome)
BLU Gateway
BLU Gateway Gen3
Plus UNI
Pro 3 EM
selection subtraction (ctrl+shift)
-graphs INT_TEMP,RSSI,P,S,V,I,T_ALL,H,LUX,FREQ
 e.g. java -jar C:\Users\antonio\shellyscan-1.2.0.jar -graphs V -ipscan 192.168.1.203-203
 
1.2.1
Support for Plug S Gen3
chacklist multiselection
checklis - extender: "-" non applicabile, X non attivo
checklis - roaming editabile; for G2 interval 60s - 0s
checklis - wi-fi edit
checklis - script (num / enabled) + edit
full Blu TRV support (also fw update)
improved Shelly Pro 3EM support
optional fahrenheit temperature unit
consecutive fw updates progress fixed

1.2.2/1.2.3
Shelly Pro Dimmer 2PM
3EM-63 G3
Shelly Pro RGBWW PM
Shelly Dimmer Gen3
Shelly BLU Motion
Ogemray SW40
Shelly gen4 generic
G2+ AP retore ssid (fw 1.5.0)
fix G2+ did not restore roaming parameters on some circumstances
executor.schedule(() -> errorsReconnect(), 25, TimeUnit.SECONDS);
/rpc/BLE.CloudRelay.ListInfos
checklist - semantica BLE: Solo dispositivi di seconda generazione o generazione successiva; se il bluetooth è attivo appare un numero corrispondente ai dispositivi connessi (<span class="text-danger">0</span> in rosso; in caso di non utilizzo è preferibile spegnere il BLE), appare una <span class="text-success">✗</span> verde altrimenti.
checklist - semantica Extender checklist
KVS.GetMany compatibility with fw 1.5.x
-
Shelly Pro Dual Cover (partial)
LinkedGo ST1820 - LinkedGo ST802 minimal support (measures only)
checklist - logs editable also for G2+ devices
windows installer

1.2.4
Shelly 1 Gen4
Shelly 1PM Gen4
Shelly 1 Mini Gen4
Shelly 1PM Mini Gen4
LinkedGo ST1820 thermostat
LinkedGo ST802 thermostat (no humidity, no fan)
device info gen4: matter
search on fw update
multi restore: no enable restricted login, no wi-fi (1/2) password, no AP password, no MQTT password, Script override, no reboot offer
matter "enable" restore
LoRa restore
existence of input:1 pro1 and pro1PM
gen2+ restore "debug"

Shelly.GetComponents pagination
BLE.CloudRelay.ListInfos pagination
KVS.GetMany pagination
Graphs: types combo only have pertinent values
lettura dati per array (itarator) su restore e su GET (offset)
blu -> buttons from actions


1.2.6
---
Shelly 2PM Gen4
Shelly Shutter G3
schedule gen2+, BLU trv
schedule wall display thermostat
schedule load ...
wall display restore therm profiles
zigbee
restore compatibility table
firmware update dialog - double click & menu on table
fix: The SOURCE sorting works incorrectly

https://next-api-docs.shelly.cloud/gen2/ComponentsAndServices/Schedule
https://github.com/mongoose-os-libs/cron
https://crontab.guru/

virtual components paging - it.usna.shellyscan.model.device.blu.BTHomeDevice.refreshStatus()


1.3.0
---
Outdoor Plug S G3
BLU Remote
BLU Distance
Power Strip
Enegy (EM)
MacOS cmd-C, cmd-V, cmd-X
column sorting, e.g. to sort FW versions or device names (Krzysztof Ce)
fw update multiselection and buttons working on selection (if lenght > 1)
Enable RPC over MQTT - Enable 'MQTT Control' parametes (gen2+)
various fix on scheduler editor


1.3.1
---
Dimmer G4
plug PM gen3
chacklist - auto fw update
schedule wall display thermostat - profile selection
ottimizzazione ip sort (long)
ottimizazione call agli host BTHome
"skip" on scripts restore
Export script fix for certain charsets
cli restore / cli list ip/full / cli -gen parameter 


1.3.2
---
Shelly Wall Display X2i - Supported bases: 2-output power base; 2-output power base
Shelly EM Gen3
Shelly Flood Gen4
-slow cli par (Mirco Krug - fb)
-font cli par (GitHub issue)
gen2+ protected devices logs


1.3.3
---
Plug M Gen3
Shelly Mini EM Gen4
Shelly EM Gen4
Shelly Duo Bulb E27 Gen3
Shelly Multicolor Bulb E27 Gen3
Shelly Presence
Shelly Flood S Gen4
BLU DW status
Chart: V custom expression
bug fixed on Shelly Pro Dual Cover
bug fixed on 3EM total power graph

addon PRO:
Shelly Pro 1 (X)
Shelly Pro 1PM (X)
Shelly Pro 2 (X)
Shelly Pro 2PM (X)
Shelly Pro 3EM
Shelly Pro Dimmer 0/1–10V PM (not supported)
Shelly Pro Dimmer 1PM (X)
Shelly Pro Dimmer 2PM (X)
Shelly Pro EM-50 (X)

LORA addon PRO:
Shelly Pro 1 (X)
Shelly Pro 1PM (X)
Shelly Pro 2 (X)
Shelly Pro 2PM (X)
Shelly Pro 3EM
Shelly Pro Dimmer 0/1–10V PM (not supported)
Shelly Pro Dimmer 1PM (X)
Shelly Pro Dimmer 2PM (X)
Shelly Pro EM-50 (X)
Shelly Pro RGBWW PM (X)


1.3.4
---
Shelly Camera
Shelly Dimmer 0/1-10V Gen4
ProRGBWWPM.SetConfig hf_mode restore
bluTRV optimized code on gateway gen3
sheduler : Shelly RGB bulb G3 (new hints)
sheduler : test button
sheduler : param editor
chacklist: fix on AP & EXT (fw 2.0.0)
lnm restore
 - https://shelly-api-docs.shelly.cloud/gen2/General/LocalNetworkMessaging
 - https://shelly-api-docs.shelly.cloud/gen2/DynamicComponents/LNM/#lnmgetconfig


todo: Firmware 2.0.0
- wi-fi channel in checklist ?
  
todo Unificazione AP-extender X - V - num

todo VerticalWrapLayout -> VerticalFlowLayout2

todo backup notes
todo location

todo blu reload (num IP)

todo - java -jar C:\Users\Administrator\Desktop\shellyscan_1_3_1_sj.jar  -graphs EM -ipscan 192.168.1.200-200
/rpc/PresenceZone.GetConfig?id=201
http://192.168.1.15/rpc/Voltmeter.SetConfig?id=100&config={%22xvoltage%22:null}


--- coming ?
// scheduler hints for camera
// It would also be nice to add dynamic filters that show, for example, only enabled devices or disabled devices on the main view (?)
// rgb_xx panel listener (?) -> model su DevicesTable -> su DevicesCommandCellEditor -> DialogEditLights che diventa listener e chiama i 
// checklist AP ssid != mac (fw 1.5.0 stable)
// portare il modello sulla tabella per semplificare il calcolo dei tooltip (e delle icone di stato)
// Xmod1 sganciare bottone se detatched (?)
// add "knx" support
// rivedere it.usna.shellyscan.model.device.g2.ShellyPlusi4 alla luce di "Input.Trigger" (?) no, al momento è gestibile solo il push
// inclusione massiva
// gestione "reading": se stato online leggo ShellyAbstractDevice.lastConnection, se systime - lastConnection > intervallo * 3 modifico lo stato - si, ma dove, task specifico?
// InetAddressAndPort potrebbe mantenere direttamente i byte (sarebbe estremamente ottimizzato); tuttavia attenderei l'introduzione di IPv6
// color weel https://stackoverflow.com/questions/36252778/how-to-draw-a-rgb-color-wheel-in-java
// https://smarthomecircle.com/connect-xiaomi-temperature-and-humidity-bluetooth-sensor-to-home-assistant
// addon dimmer gen3 (currently not supported by fw)
// Webhook.ListSupported

https://jetty.org/docs/jetty/12.1/operations-guide/keystore/index.html

------- java 21+ -------
ThreadFactory factory = Thread.ofVirtual().factory();
ScheduledExecutorService scheduledExecutorService = Executors.newScheduledThreadPool(0, factory);