Does lvgl_micropython support ESP32P4?

[lifedebug]

I used the following command to build the ESP32P4 firmware:
'python3 make.py esp32 clean --flash-size=16 BOARD=ESP32_GENERIC_P4'

Then, through Thonny, the "st7796" folder was created, and the files "init.py", "_st7796_init.py", and "st7796.py" were uploaded to this folder.
init.py

import sys
from . import st7796
from . import _st7796_init

sys.modules['_st7796_init'] = _st7796_init


__all__ = [
    'ST7796',
    'STATE_HIGH',
    'STATE_LOW',
    'STATE_PWM',
    'BYTE_ORDER_RGB',
    'BYTE_ORDER_BGR',
]


ST7796 = st7796.ST7796
STATE_HIGH = st7796.STATE_HIGH
STATE_LOW = st7796.STATE_LOW
STATE_PWM = st7796.STATE_PWM
BYTE_ORDER_RGB = st7796.BYTE_ORDER_RGB
BYTE_ORDER_BGR = st7796.BYTE_ORDER_BGR

_st7796_init.py

# Copyright (c) 2024 - 2025 Kevin G. Schlosser

import time
from micropython import const  # NOQA

import lvgl as lv  # NOQA

_SWRESET = const(0x01)
_SLPOUT = const(0x11)
_CSCON = const(0xF0)
_MADCTL = const(0x36)
_COLMOD = const(0x3A)
_DIC = const(0xB4)
_DFC = const(0xB6)
_DOCA = const(0xE8)
_PWR2 = const(0xC1)
_PWR3 = const(0xC2)
_VCMPCTL = const(0xC5)
_PGC = const(0xE0)
_NGC = const(0xE1)
_DISPON = const(0x29)

_EM = const(0xB7)


def init(self):
    param_buf = bytearray(14)
    param_mv = memoryview(param_buf)

    self.set_params(_SWRESET)

    time.sleep_ms(120)  # NOQA

    self.set_params(_SLPOUT)

    time.sleep_ms(120)  # NOQA

    param_buf[0] = 0xC3
    self.set_params(_CSCON, param_mv[:1])

    param_buf[0] = 0x96
    self.set_params(_CSCON, param_mv[:1])

    param_buf[0] = (
        self._madctl(
            self._color_byte_order,
            self._ORIENTATION_TABLE  # NOQA
        )
    )
    self.set_params(_MADCTL, param_mv[:1])

    color_size = lv.color_format_get_size(self._color_space)
    if color_size == 2:  # NOQA
        pixel_format = 0x05
    elif color_size == 3:
        pixel_format = 0x07
    else:
        raise RuntimeError(
            'ST7796 IC only supports '
            'lv.COLOR_FORMAT.RGB565 or lv.COLOR_FORMAT.RGB888'
        )

    param_buf[0] = pixel_format
    self.set_params(_COLMOD, param_mv[:1])

    param_buf[0] = 0xC6
    self.set_params(_EM, param_mv[:1])

    param_buf[0] = 0x01
    self.set_params(_DIC, param_mv[:1])

    param_buf[0] = 0x80
    param_buf[1] = 0x02
    param_buf[2] = 0x3B
    self.set_params(_DFC, param_mv[:3])

    param_buf[:8] = bytearray(
        [
            0x40, 0x8A, 0x00, 0x00, 0x29, 0x19, 0xA5, 0x33
        ]
    )
    self._data_bus.tx_param(_DOCA, param_mv[:8])

    param_buf[0] = 0x06
    self.set_params(_PWR2, param_mv[:1])

    param_buf[0] = 0xA7
    self.set_params(_PWR3, param_mv[:1])

    param_buf[0] = 0x18
    self.set_params(_VCMPCTL, param_mv[:1])

    time.sleep_ms(120)  # NOQA

    param_buf[:14] = bytearray(
        [
            0xF0, 0x09, 0x0b, 0x06, 0x04, 0x15, 0x2F,
            0x54, 0x42, 0x3C, 0x17, 0x14, 0x18, 0x1B
        ]
    )
    self.set_params(_PGC, param_mv[:14])

    param_buf[:14] = bytearray(
        [
            0xF0, 0x09, 0x0B, 0x06, 0x04, 0x03, 0x2D,
            0x43, 0x42, 0x3B, 0x16, 0x14, 0x17, 0x1B
        ]
    )
    self.set_params(_NGC, param_mv[:14])

    time.sleep_ms(120)  # NOQA

    param_buf[0] = 0x3C
    self.set_params(_CSCON, param_mv[:1])

    param_buf[0] = 0x69
    self.set_params(_CSCON, param_mv[:1])

    time.sleep_ms(120)  # NOQA

    self.set_params(_DISPON)

    time.sleep_ms(120)  # NOQA

st7796.py

# Copyright (c) 2024 - 2025 Kevin G. Schlosser

from micropython import const  # NOQA
import display_driver_framework


STATE_HIGH = display_driver_framework.STATE_HIGH
STATE_LOW = display_driver_framework.STATE_LOW
STATE_PWM = display_driver_framework.STATE_PWM

BYTE_ORDER_RGB = display_driver_framework.BYTE_ORDER_RGB
BYTE_ORDER_BGR = display_driver_framework.BYTE_ORDER_BGR

_MADCTL_MV = const(0x20)
_MADCTL_MX = const(0x40)
_MADCTL_MY = const(0x80)


class ST7796(display_driver_framework.DisplayDriver):

    _ORIENTATION_TABLE = (
        _MADCTL_MX,
        _MADCTL_MV | _MADCTL_MY | _MADCTL_MX,
        _MADCTL_MY,
        _MADCTL_MV
    )

Then the main.py file was created and the program was written into it:

import  st7796
import lcd_bus
import lvgl as lv
import time
from micropython import const
import machine
from machine import Pin
#import pointer_framework
import i2c
# Display settings
_WIDTH = const(320)
_HEIGHT = const(480)

# Common SPI bus settings
_SPI_HOST = const(2)
_MOSI_PIN = const(30)
_MISO_PIN = const(31)
_SCLK_PIN = const(32)

# Display SPI bus settings
_LCD_SPI_FREQ = const(20_000_000)
_LCD_CS_PIN = const(28)
# display additional pins
_LCD_RST_PIN = const(12)
_LCD_DC_PIN = const(13)
_LCD_BKL_PIN = const(20)

spi_bus = machine.SPI.Bus(
    host=_SPI_HOST,
    miso=_MISO_PIN,
    mosi=_MOSI_PIN,
    sck=_SCLK_PIN,
)

display_bus = lcd_bus.SPIBus(
    spi_bus=spi_bus,
    freq=_LCD_SPI_FREQ,
    dc=_LCD_DC_PIN,
    cs=_LCD_CS_PIN
)

_BUFFER_SIZE = const(_WIDTH * _HEIGHT * 2 // 4 )
#fb1 = display_bus.allocate_framebuffer(_BUFFER_SIZE, lcd_bus.MEMORY_SPIRAM | lcd_bus.MEMORY_DMA)
#fb2 = display_bus.allocate_framebuffer(_BUFFER_SIZE, lcd_bus.MEMORY_SPIRAM | lcd_bus.MEMORY_DMA)

#fb1 = display_bus.allocate_framebuffer(_BUFFER_SIZE, lcd_bus.MEMORY_INTERNAL | lcd_bus.MEMORY_DMA)
#fb2 = display_bus.allocate_framebuffer(_BUFFER_SIZE, lcd_bus.MEMORY_INTERNAL | lcd_bus.MEMORY_DMA)


display = st7796.ST7796(
    data_bus=display_bus,
    #frame_buffer1=fb1,
    #frame_buffer2=fb2,
    display_width=_WIDTH,
    display_height=_HEIGHT,
    color_space=lv.COLOR_FORMAT.RGB888,
    color_byte_order=st7796.BYTE_ORDER_BGR,
    rgb565_byte_swap=True,

    backlight_pin=_LCD_BKL_PIN,
    backlight_on_state=st7796.STATE_PWM,

    reset_pin=_LCD_RST_PIN,
    reset_state=st7796.STATE_LOW,

)

However, the following error was encountered during runtime:
'Traceback (most recent call last):
File "main.py", line 64, in
File "display_driver_framework.py", line 231, in init
File "display_driver_framework.py", line 243, in _init_bus'
ValueError: SPI(2) invalid configuration

Could you please help me identify where my mistake is, or is it that the lvgl_micropython currently doesn't have sufficient support for the ESP32P4?