diff --git a/src/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md b/src/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
index 391382e4f..4dd1fe4ff 100644
--- a/src/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
+++ b/src/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
@@ -66,6 +66,19 @@ if has_next:
**Note:** Avoid mixing different traversal methods (e.g., combining `todf()` with `next_df()`), which may cause unexpected errors.
+**Since V2.0.8.3**, the Python client has supported `TSDataType.OBJECT` for Tablet batch write and Session value serialization. Query results are read via the `Field` object. The related interfaces are defined as follows:
+
+| Function Name | Description | Parameters | Return Value |
+|---------------|-------------|------------|--------------|
+| `encode_object_cell` | Encodes a single OBJECT cell into wire-format bytes | `is_eof: bool`,
`offset: int`,
`content: bytes` | `bytes`: `|[eof 1B]|[offset 8B BE]|[payload]|` |
+| `decode_object_cell` | Parses a wire-format cell back into `eof`, `offset`, and `payload` | `cell: bytes` (length ≥ 9) | `Tuple[bool, int, bytes]`: `(is_eof, offset, payload)` |
+| `Tablet.add_value_object` | Writes an OBJECT cell at the specified row and column (internally calls `encode_object_cell`) | `row_index: int`,
`column_index: int`,
`is_eof: bool`,
`offset: int`,
`content: bytes` | `None` |
+| `Tablet.add_value_object_by_name` | Same as above, locates column by name | `column_name: str`,
`row_index: int`,
`is_eof: bool`,
`offset: int`,
`content: bytes` | `None` |
+| `NumpyTablet.add_value_object` | Same semantics as `Tablet.add_value_object`, column data is stored as `ndarray` | Same as above (`row_index`, `column_index`, ...) | `None` |
+| `Field.get_object_value` | Converts the value to a Python value based on the **target type** | `data_type: TSDataType` | Depends on type:
For OBJECT: `str` decoded from the entire `self.value` in UTF-8 (see Field.py) |
+| `Field.get_string_value` | Returns a string representation | None | `str`;
For OBJECT: `self.value.decode("utf-8")` |
+| `Field.get_binary_value` | Gets the binary data of TEXT/STRING/BLOB | None | `bytes` or `None`;
**Throws an error for OBJECT columns and should not be called** |
+
#### Sample Code
@@ -511,7 +524,7 @@ def query_data():
while res.has_next():
print(res.next())
- print("get data from table1")
+ print("get data from table1")
with session.execute_query_statement("select * from table1") as res:
while res.has_next():
print(res.next())
@@ -521,7 +534,7 @@ def query_data():
with session.execute_query_statement("select * from table0") as res:
while res.has_next_df():
print(res.next_df())
-
+
session.close()
@@ -571,3 +584,169 @@ session_pool.close()
print("example is finished!")
```
+**Object Type Usage Example**
+
+```python
+import os
+
+import numpy as np
+import pytest
+
+from iotdb.utils.IoTDBConstants import TSDataType
+from iotdb.utils.NumpyTablet import NumpyTablet
+from iotdb.utils.Tablet import Tablet, ColumnType
+from iotdb.utils.object_column import decode_object_cell
+
+
+def _require_thrift():
+ pytest.importorskip("iotdb.thrift.common.ttypes")
+
+
+def _session_endpoint():
+ host = os.environ.get("IOTDB_HOST", "127.0.0.1")
+ port = int(os.environ.get("IOTDB_PORT", "6667"))
+ return host, port
+
+
+@pytest.fixture(scope="module")
+def table_session():
+ _require_thrift()
+ from iotdb.Session import Session
+ from iotdb.table_session import TableSession, TableSessionConfig
+
+ host, port = _session_endpoint()
+ cfg = TableSessionConfig(
+ node_urls=[f"{host}:{port}"],
+ username=os.environ.get("IOTDB_USER", Session.DEFAULT_USER),
+ password=os.environ.get("IOTDB_PASSWORD", Session.DEFAULT_PASSWORD),
+ )
+ ts = TableSession(cfg)
+ yield ts
+ ts.close()
+
+
+def test_table_numpy_tablet_object_columns(table_session):
+ """
+ Table model: Tablet.add_value_object / add_value_object_by_name,
+ NumpyTablet.add_value_object, insert + query Field + decode_object_cell;
+ Also includes writing OBJECT in two segments at the same timestamp
+ (first with is_eof=False/offset=0, then with is_eof=True/offset=length of the first segment),
+ and verifies the complete concatenated bytes using read_object(f1).
+ """
+ db = "test_py_object_e2e"
+ table = "obj_tbl"
+ table_session.execute_non_query_statement(f"CREATE DATABASE IF NOT EXISTS {db}")
+ table_session.execute_non_query_statement(f"USE {db}")
+ table_session.execute_non_query_statement(f"DROP TABLE IF EXISTS {table}")
+ table_session.execute_non_query_statement(
+ f"CREATE TABLE {table}("
+ "device STRING TAG, temp FLOAT FIELD, f1 OBJECT FIELD, f2 OBJECT FIELD)"
+ )
+
+ column_names = ["device", "temp", "f1", "f2"]
+ data_types = [
+ TSDataType.STRING,
+ TSDataType.FLOAT,
+ TSDataType.OBJECT,
+ TSDataType.OBJECT,
+ ]
+ column_types = [
+ ColumnType.TAG,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ]
+ timestamps = [100, 200]
+ values = [
+ ["d1", 1.5, None, None],
+ ["d1", 2.5, None, None],
+ ]
+
+ tablet = Tablet(
+ table, column_names, data_types, values, timestamps, column_types
+ )
+ tablet.add_value_object(0, 2, True, 0, b"first-row-obj")
+ # Single-segment write for the entire object: is_eof=True and offset=0;
+ # Segmented sequential writes must pass server-side offset/length validation
+ tablet.add_value_object_by_name("f2", 0, True, 0, b"seg")
+ tablet.add_value_object(1, 2, True, 0, b"second-f1")
+ tablet.add_value_object(1, 3, True, 0, b"second-f2")
+ table_session.insert(tablet)
+
+ ts_arr = np.array([300, 400], dtype=TSDataType.INT64.np_dtype())
+ np_vals = [
+ np.array(["d1", "d1"]),
+ np.array([1.0, 2.0], dtype=np.float32),
+ np.array([None, None], dtype=object),
+ np.array([None, None], dtype=object),
+ ]
+ np_tab = NumpyTablet(
+ table, column_names, data_types, np_vals, ts_arr, column_types=column_types
+ )
+ np_tab.add_value_object(0, 2, True, 0, b"np-r0-f1")
+ np_tab.add_value_object(0, 3, True, 0, b"np-r0-f2")
+ np_tab.add_value_object(1, 2, True, 0, b"np-r1-f1")
+ np_tab.add_value_object(1, 3, True, 0, b"np-r1-f2")
+ table_session.insert(np_tab)
+
+ # Segmented OBJECT: first with is_eof=False (continue transmission),
+ # then with is_eof=True (last segment); offset is the length of written bytes
+ chunk0 = bytes((i % 256) for i in range(512))
+ chunk1 = b"\xab" * 64
+ expected_segmented = chunk0 + chunk1
+ seg1 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg1.add_value_object(0, 2, False, 0, chunk0)
+ seg1.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg1)
+ seg2 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg2.add_value_object(0, 2, True, 512, chunk1)
+ seg2.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg2)
+
+ with table_session.execute_query_statement(
+ f"SELECT read_object(f1) FROM {table} WHERE time = 500"
+ ) as ds:
+ assert ds.has_next()
+ row = ds.next()
+ blob = row.get_fields()[0].get_binary_value()
+ assert blob == expected_segmented
+ assert not ds.has_next()
+
+ seen = 0
+ with table_session.execute_query_statement(
+ f"SELECT device, temp, f1, f2 FROM {table} ORDER BY time"
+ ) as ds:
+ while ds.has_next():
+ row = ds.next()
+ fields = row.get_fields()
+ assert fields[0].get_object_value(TSDataType.STRING) == "d1"
+ assert fields[1].get_object_value(TSDataType.FLOAT) is not None
+ for j in (2, 3):
+ raw = fields[j].value
+ assert isinstance(raw, (bytes, bytearray))
+ eof, off, body = decode_object_cell(bytes(raw))
+ assert isinstance(eof, bool) and isinstance(off, int)
+ assert isinstance(body, bytes)
+ fields[j].get_string_value()
+ fields[j].get_object_value(TSDataType.OBJECT)
+ seen += 1
+ assert seen == 5
+
+
+if __name__ == "__main__":
+ pytest.main([__file__, "-v", "-rs"])
+```
\ No newline at end of file
diff --git a/src/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md b/src/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
index fef00468e..4dd1fe4ff 100644
--- a/src/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
+++ b/src/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
@@ -66,6 +66,20 @@ if has_next:
**Note:** Avoid mixing different traversal methods (e.g., combining `todf()` with `next_df()`), which may cause unexpected errors.
+**Since V2.0.8.3**, the Python client has supported `TSDataType.OBJECT` for Tablet batch write and Session value serialization. Query results are read via the `Field` object. The related interfaces are defined as follows:
+
+| Function Name | Description | Parameters | Return Value |
+|---------------|-------------|------------|--------------|
+| `encode_object_cell` | Encodes a single OBJECT cell into wire-format bytes | `is_eof: bool`,
`offset: int`,
`content: bytes` | `bytes`: `|[eof 1B]|[offset 8B BE]|[payload]|` |
+| `decode_object_cell` | Parses a wire-format cell back into `eof`, `offset`, and `payload` | `cell: bytes` (length ≥ 9) | `Tuple[bool, int, bytes]`: `(is_eof, offset, payload)` |
+| `Tablet.add_value_object` | Writes an OBJECT cell at the specified row and column (internally calls `encode_object_cell`) | `row_index: int`,
`column_index: int`,
`is_eof: bool`,
`offset: int`,
`content: bytes` | `None` |
+| `Tablet.add_value_object_by_name` | Same as above, locates column by name | `column_name: str`,
`row_index: int`,
`is_eof: bool`,
`offset: int`,
`content: bytes` | `None` |
+| `NumpyTablet.add_value_object` | Same semantics as `Tablet.add_value_object`, column data is stored as `ndarray` | Same as above (`row_index`, `column_index`, ...) | `None` |
+| `Field.get_object_value` | Converts the value to a Python value based on the **target type** | `data_type: TSDataType` | Depends on type:
For OBJECT: `str` decoded from the entire `self.value` in UTF-8 (see Field.py) |
+| `Field.get_string_value` | Returns a string representation | None | `str`;
For OBJECT: `self.value.decode("utf-8")` |
+| `Field.get_binary_value` | Gets the binary data of TEXT/STRING/BLOB | None | `bytes` or `None`;
**Throws an error for OBJECT columns and should not be called** |
+
+
#### Sample Code
```Python
@@ -570,3 +584,169 @@ session_pool.close()
print("example is finished!")
```
+**Object Type Usage Example**
+
+```python
+import os
+
+import numpy as np
+import pytest
+
+from iotdb.utils.IoTDBConstants import TSDataType
+from iotdb.utils.NumpyTablet import NumpyTablet
+from iotdb.utils.Tablet import Tablet, ColumnType
+from iotdb.utils.object_column import decode_object_cell
+
+
+def _require_thrift():
+ pytest.importorskip("iotdb.thrift.common.ttypes")
+
+
+def _session_endpoint():
+ host = os.environ.get("IOTDB_HOST", "127.0.0.1")
+ port = int(os.environ.get("IOTDB_PORT", "6667"))
+ return host, port
+
+
+@pytest.fixture(scope="module")
+def table_session():
+ _require_thrift()
+ from iotdb.Session import Session
+ from iotdb.table_session import TableSession, TableSessionConfig
+
+ host, port = _session_endpoint()
+ cfg = TableSessionConfig(
+ node_urls=[f"{host}:{port}"],
+ username=os.environ.get("IOTDB_USER", Session.DEFAULT_USER),
+ password=os.environ.get("IOTDB_PASSWORD", Session.DEFAULT_PASSWORD),
+ )
+ ts = TableSession(cfg)
+ yield ts
+ ts.close()
+
+
+def test_table_numpy_tablet_object_columns(table_session):
+ """
+ Table model: Tablet.add_value_object / add_value_object_by_name,
+ NumpyTablet.add_value_object, insert + query Field + decode_object_cell;
+ Also includes writing OBJECT in two segments at the same timestamp
+ (first with is_eof=False/offset=0, then with is_eof=True/offset=length of the first segment),
+ and verifies the complete concatenated bytes using read_object(f1).
+ """
+ db = "test_py_object_e2e"
+ table = "obj_tbl"
+ table_session.execute_non_query_statement(f"CREATE DATABASE IF NOT EXISTS {db}")
+ table_session.execute_non_query_statement(f"USE {db}")
+ table_session.execute_non_query_statement(f"DROP TABLE IF EXISTS {table}")
+ table_session.execute_non_query_statement(
+ f"CREATE TABLE {table}("
+ "device STRING TAG, temp FLOAT FIELD, f1 OBJECT FIELD, f2 OBJECT FIELD)"
+ )
+
+ column_names = ["device", "temp", "f1", "f2"]
+ data_types = [
+ TSDataType.STRING,
+ TSDataType.FLOAT,
+ TSDataType.OBJECT,
+ TSDataType.OBJECT,
+ ]
+ column_types = [
+ ColumnType.TAG,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ]
+ timestamps = [100, 200]
+ values = [
+ ["d1", 1.5, None, None],
+ ["d1", 2.5, None, None],
+ ]
+
+ tablet = Tablet(
+ table, column_names, data_types, values, timestamps, column_types
+ )
+ tablet.add_value_object(0, 2, True, 0, b"first-row-obj")
+ # Single-segment write for the entire object: is_eof=True and offset=0;
+ # Segmented sequential writes must pass server-side offset/length validation
+ tablet.add_value_object_by_name("f2", 0, True, 0, b"seg")
+ tablet.add_value_object(1, 2, True, 0, b"second-f1")
+ tablet.add_value_object(1, 3, True, 0, b"second-f2")
+ table_session.insert(tablet)
+
+ ts_arr = np.array([300, 400], dtype=TSDataType.INT64.np_dtype())
+ np_vals = [
+ np.array(["d1", "d1"]),
+ np.array([1.0, 2.0], dtype=np.float32),
+ np.array([None, None], dtype=object),
+ np.array([None, None], dtype=object),
+ ]
+ np_tab = NumpyTablet(
+ table, column_names, data_types, np_vals, ts_arr, column_types=column_types
+ )
+ np_tab.add_value_object(0, 2, True, 0, b"np-r0-f1")
+ np_tab.add_value_object(0, 3, True, 0, b"np-r0-f2")
+ np_tab.add_value_object(1, 2, True, 0, b"np-r1-f1")
+ np_tab.add_value_object(1, 3, True, 0, b"np-r1-f2")
+ table_session.insert(np_tab)
+
+ # Segmented OBJECT: first with is_eof=False (continue transmission),
+ # then with is_eof=True (last segment); offset is the length of written bytes
+ chunk0 = bytes((i % 256) for i in range(512))
+ chunk1 = b"\xab" * 64
+ expected_segmented = chunk0 + chunk1
+ seg1 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg1.add_value_object(0, 2, False, 0, chunk0)
+ seg1.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg1)
+ seg2 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg2.add_value_object(0, 2, True, 512, chunk1)
+ seg2.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg2)
+
+ with table_session.execute_query_statement(
+ f"SELECT read_object(f1) FROM {table} WHERE time = 500"
+ ) as ds:
+ assert ds.has_next()
+ row = ds.next()
+ blob = row.get_fields()[0].get_binary_value()
+ assert blob == expected_segmented
+ assert not ds.has_next()
+
+ seen = 0
+ with table_session.execute_query_statement(
+ f"SELECT device, temp, f1, f2 FROM {table} ORDER BY time"
+ ) as ds:
+ while ds.has_next():
+ row = ds.next()
+ fields = row.get_fields()
+ assert fields[0].get_object_value(TSDataType.STRING) == "d1"
+ assert fields[1].get_object_value(TSDataType.FLOAT) is not None
+ for j in (2, 3):
+ raw = fields[j].value
+ assert isinstance(raw, (bytes, bytearray))
+ eof, off, body = decode_object_cell(bytes(raw))
+ assert isinstance(eof, bool) and isinstance(off, int)
+ assert isinstance(body, bytes)
+ fields[j].get_string_value()
+ fields[j].get_object_value(TSDataType.OBJECT)
+ seen += 1
+ assert seen == 5
+
+
+if __name__ == "__main__":
+ pytest.main([__file__, "-v", "-rs"])
+```
\ No newline at end of file
diff --git a/src/zh/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md b/src/zh/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
index 81c09a0f2..b927a1827 100644
--- a/src/zh/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
+++ b/src/zh/UserGuide/Master/Table/API/Programming-Python-Native-API_timecho.md
@@ -67,6 +67,21 @@ if has_next:
**注意：** 不要混合使用不同的遍历方式，如（todf函数与 next_df 混用），否则会出现预期外的错误。
+
+自 V2.0.8.3 版本起，Python 客户端在 `Tablet`批量写入与 `Session` 值序列化中支持 `TSDataType.OBJECT` ，查询结果经 `Field` 读取，相关接口定义如下：
+
+| 函数名 | 功能 | 参数 | 返回值 |
+| ------------------------------------- | ------------------------------------------------------------ | --------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------- |
+| encode\_object\_cell | 将一格 OBJECT 编成线格式字节 | is\_eof: bool,offset: int,content: bytes | bytes：\|[eof 1B]\|[offset 8B BE]\|[payload]\| |
+| decode\_object\_cell | 把线格式一格解析回 eof、offset、payload | cell: bytes（长度 ≥ 9） | Tuple[bool, int, bytes]：(is\_eof, offset, payload) |
+| Tablet.add\_value\_object | 在指定行列写入一格 OBJECT（内部调用 encode\_object\_cell） | row\_index: int，column\_index: int，is\_eof: bool，offset: int，content: bytes | None |
+| Tablet.add\_value\_object\_by\_name | 同上，按列名定位列 | column\_name: str，row\_index: int，is\_eof: bool，offset: int，content: bytes | None |
+| NumpyTablet.add\_value\_object | 与 Tablet.add\_value\_object 相同语义，列数据为 ndarray | 同上（row\_index、column\_index、…） | None |
+| Field.get\_object\_value | 按「目标类型」把 value 转成 Python 值 | data\_type: TSDataType | 随类型：OBJECT 时为 self.value 整段 UTF-8 解码 得到的 str（见[Field.py](https://github.com/apache/iotdb/blob/master/iotdb-client/client-py/iotdb/utils/Field.py)） |
+| Field.get\_string\_value | 字符串化展示 | 无 | str；OBJECT 时为 self.value.decode("utf-8") |
+| Field.get\_binary\_value | 取 TEXT/STRING/BLOB 的二进制 | 无 | bytes 或 None；OBJECT 列会抛错，不应调用 |
+
+
#### 2.1.3 接口展示
**TableSession:**
@@ -524,7 +539,7 @@ def query_data():
# 使用分批DataFrame方式查询表数据（推荐大数据量场景）
print("get data from table0 using batch DataFrame")
- with session.execute_query_statement("select * from table0") as res:
+ with session.execute_query_statement("select * from table0") as res:
while res.has_next_df():
print(res.next_df())
@@ -577,3 +592,166 @@ session_pool.close()
print("example is finished!")
```
+Object 类型使用示例：
+
+```Python
+import os
+
+import numpy as np
+import pytest
+
+from iotdb.utils.IoTDBConstants import TSDataType
+from iotdb.utils.NumpyTablet import NumpyTablet
+from iotdb.utils.Tablet import Tablet, ColumnType
+from iotdb.utils.object_column import decode_object_cell
+
+
+def _require_thrift():
+ pytest.importorskip("iotdb.thrift.common.ttypes")
+
+
+def _session_endpoint():
+ host = os.environ.get("IOTDB_HOST", "127.0.0.1")
+ port = int(os.environ.get("IOTDB_PORT", "6667"))
+ return host, port
+
+
+@pytest.fixture(scope="module")
+def table_session():
+ _require_thrift()
+ from iotdb.Session import Session
+ from iotdb.table_session import TableSession, TableSessionConfig
+
+ host, port = _session_endpoint()
+ cfg = TableSessionConfig(
+ node_urls=[f"{host}:{port}"],
+ username=os.environ.get("IOTDB_USER", Session.DEFAULT_USER),
+ password=os.environ.get("IOTDB_PASSWORD", Session.DEFAULT_PASSWORD),
+ )
+ ts = TableSession(cfg)
+ yield ts
+ ts.close()
+
+
+def test_table_numpy_tablet_object_columns(table_session):
+ """
+ Table model: Tablet.add_value_object / add_value_object_by_name,
+ NumpyTablet.add_value_object, insert + query Field + decode_object_cell；
+ 另含同一 time 上分两段写入 OBJECT（先 is_eof=False/offset=0，再 is_eof=True/offset=首段长度），
+ 并用 read_object(f1) 校验拼接后的完整字节。
+ """
+ db = "test_py_object_e2e"
+ table = "obj_tbl"
+ table_session.execute_non_query_statement(f"create database if not exists {db}")
+ table_session.execute_non_query_statement(f"use {db}")
+ table_session.execute_non_query_statement(f"drop table if exists {table}")
+ table_session.execute_non_query_statement(
+ f"create table {table}("
+ "device STRING TAG, temp FLOAT FIELD, f1 OBJECT FIELD, f2 OBJECT FIELD)"
+ )
+
+ column_names = ["device", "temp", "f1", "f2"]
+ data_types = [
+ TSDataType.STRING,
+ TSDataType.FLOAT,
+ TSDataType.OBJECT,
+ TSDataType.OBJECT,
+ ]
+ column_types = [
+ ColumnType.TAG,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ]
+ timestamps = [100, 200]
+ values = [
+ ["d1", 1.5, None, None],
+ ["d1", 2.5, None, None],
+ ]
+
+ tablet = Tablet(
+ table, column_names, data_types, values, timestamps, column_types
+ )
+ tablet.add_value_object(0, 2, True, 0, b"first-row-obj")
+ # 整对象单段写入：is_eof=True 且 offset=0；分段续写需满足服务端 offset/长度校验
+ tablet.add_value_object_by_name("f2", 0, True, 0, b"seg")
+ tablet.add_value_object(1, 2, True, 0, b"second-f1")
+ tablet.add_value_object(1, 3, True, 0, b"second-f2")
+ table_session.insert(tablet)
+
+ ts_arr = np.array([300, 400], dtype=TSDataType.INT64.np_dtype())
+ np_vals = [
+ np.array(["d1", "d1"]),
+ np.array([1.0, 2.0], dtype=np.float32),
+ np.array([None, None], dtype=object),
+ np.array([None, None], dtype=object),
+ ]
+ np_tab = NumpyTablet(
+ table, column_names, data_types, np_vals, ts_arr, column_types=column_types
+ )
+ np_tab.add_value_object(0, 2, True, 0, b"np-r0-f1")
+ np_tab.add_value_object(0, 3, True, 0, b"np-r0-f2")
+ np_tab.add_value_object(1, 2, True, 0, b"np-r1-f1")
+ np_tab.add_value_object(1, 3, True, 0, b"np-r1-f2")
+ table_session.insert(np_tab)
+
+ # 分段 OBJECT：先 is_eof=False（续传），再 is_eof=True（末段）；offset 为已写入字节长度
+ chunk0 = bytes((i % 256) for i in range(512))
+ chunk1 = b"\xab" * 64
+ expected_segmented = chunk0 + chunk1
+ seg1 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg1.add_value_object(0, 2, False, 0, chunk0)
+ seg1.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg1)
+ seg2 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg2.add_value_object(0, 2, True, 512, chunk1)
+ seg2.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg2)
+
+ with table_session.execute_query_statement(
+ f"select read_object(f1) from {table} where time = 500"
+ ) as ds:
+ assert ds.has_next()
+ row = ds.next()
+ blob = row.get_fields()[0].get_binary_value()
+ assert blob == expected_segmented
+ assert not ds.has_next()
+
+ seen = 0
+ with table_session.execute_query_statement(
+ f"select device, temp, f1, f2 from {table} order by time"
+ ) as ds:
+ while ds.has_next():
+ row = ds.next()
+ fields = row.get_fields()
+ assert fields[0].get_object_value(TSDataType.STRING) == "d1"
+ assert fields[1].get_object_value(TSDataType.FLOAT) is not None
+ for j in (2, 3):
+ raw = fields[j].value
+ assert isinstance(raw, (bytes, bytearray))
+ eof, off, body = decode_object_cell(bytes(raw))
+ assert isinstance(eof, bool) and isinstance(off, int)
+ assert isinstance(body, bytes)
+ fields[j].get_string_value()
+ fields[j].get_object_value(TSDataType.OBJECT)
+ seen += 1
+ assert seen == 5
+
+
+if __name__ == "__main__":
+ pytest.main([__file__, "-v", "-rs"])
+```
diff --git a/src/zh/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md b/src/zh/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
index 20925783d..b927a1827 100644
--- a/src/zh/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
+++ b/src/zh/UserGuide/latest-Table/API/Programming-Python-Native-API_timecho.md
@@ -67,6 +67,21 @@ if has_next:
**注意：** 不要混合使用不同的遍历方式，如（todf函数与 next_df 混用），否则会出现预期外的错误。
+
+自 V2.0.8.3 版本起，Python 客户端在 `Tablet`批量写入与 `Session` 值序列化中支持 `TSDataType.OBJECT` ，查询结果经 `Field` 读取，相关接口定义如下：
+
+| 函数名 | 功能 | 参数 | 返回值 |
+| ------------------------------------- | ------------------------------------------------------------ | --------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------- |
+| encode\_object\_cell | 将一格 OBJECT 编成线格式字节 | is\_eof: bool,offset: int,content: bytes | bytes：\|[eof 1B]\|[offset 8B BE]\|[payload]\| |
+| decode\_object\_cell | 把线格式一格解析回 eof、offset、payload | cell: bytes（长度 ≥ 9） | Tuple[bool, int, bytes]：(is\_eof, offset, payload) |
+| Tablet.add\_value\_object | 在指定行列写入一格 OBJECT（内部调用 encode\_object\_cell） | row\_index: int，column\_index: int，is\_eof: bool，offset: int，content: bytes | None |
+| Tablet.add\_value\_object\_by\_name | 同上，按列名定位列 | column\_name: str，row\_index: int，is\_eof: bool，offset: int，content: bytes | None |
+| NumpyTablet.add\_value\_object | 与 Tablet.add\_value\_object 相同语义，列数据为 ndarray | 同上（row\_index、column\_index、…） | None |
+| Field.get\_object\_value | 按「目标类型」把 value 转成 Python 值 | data\_type: TSDataType | 随类型：OBJECT 时为 self.value 整段 UTF-8 解码 得到的 str（见[Field.py](https://github.com/apache/iotdb/blob/master/iotdb-client/client-py/iotdb/utils/Field.py)） |
+| Field.get\_string\_value | 字符串化展示 | 无 | str；OBJECT 时为 self.value.decode("utf-8") |
+| Field.get\_binary\_value | 取 TEXT/STRING/BLOB 的二进制 | 无 | bytes 或 None；OBJECT 列会抛错，不应调用 |
+
+
#### 2.1.3 接口展示
**TableSession:**
@@ -577,3 +592,166 @@ session_pool.close()
print("example is finished!")
```
+Object 类型使用示例：
+
+```Python
+import os
+
+import numpy as np
+import pytest
+
+from iotdb.utils.IoTDBConstants import TSDataType
+from iotdb.utils.NumpyTablet import NumpyTablet
+from iotdb.utils.Tablet import Tablet, ColumnType
+from iotdb.utils.object_column import decode_object_cell
+
+
+def _require_thrift():
+ pytest.importorskip("iotdb.thrift.common.ttypes")
+
+
+def _session_endpoint():
+ host = os.environ.get("IOTDB_HOST", "127.0.0.1")
+ port = int(os.environ.get("IOTDB_PORT", "6667"))
+ return host, port
+
+
+@pytest.fixture(scope="module")
+def table_session():
+ _require_thrift()
+ from iotdb.Session import Session
+ from iotdb.table_session import TableSession, TableSessionConfig
+
+ host, port = _session_endpoint()
+ cfg = TableSessionConfig(
+ node_urls=[f"{host}:{port}"],
+ username=os.environ.get("IOTDB_USER", Session.DEFAULT_USER),
+ password=os.environ.get("IOTDB_PASSWORD", Session.DEFAULT_PASSWORD),
+ )
+ ts = TableSession(cfg)
+ yield ts
+ ts.close()
+
+
+def test_table_numpy_tablet_object_columns(table_session):
+ """
+ Table model: Tablet.add_value_object / add_value_object_by_name,
+ NumpyTablet.add_value_object, insert + query Field + decode_object_cell；
+ 另含同一 time 上分两段写入 OBJECT（先 is_eof=False/offset=0，再 is_eof=True/offset=首段长度），
+ 并用 read_object(f1) 校验拼接后的完整字节。
+ """
+ db = "test_py_object_e2e"
+ table = "obj_tbl"
+ table_session.execute_non_query_statement(f"create database if not exists {db}")
+ table_session.execute_non_query_statement(f"use {db}")
+ table_session.execute_non_query_statement(f"drop table if exists {table}")
+ table_session.execute_non_query_statement(
+ f"create table {table}("
+ "device STRING TAG, temp FLOAT FIELD, f1 OBJECT FIELD, f2 OBJECT FIELD)"
+ )
+
+ column_names = ["device", "temp", "f1", "f2"]
+ data_types = [
+ TSDataType.STRING,
+ TSDataType.FLOAT,
+ TSDataType.OBJECT,
+ TSDataType.OBJECT,
+ ]
+ column_types = [
+ ColumnType.TAG,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ColumnType.FIELD,
+ ]
+ timestamps = [100, 200]
+ values = [
+ ["d1", 1.5, None, None],
+ ["d1", 2.5, None, None],
+ ]
+
+ tablet = Tablet(
+ table, column_names, data_types, values, timestamps, column_types
+ )
+ tablet.add_value_object(0, 2, True, 0, b"first-row-obj")
+ # 整对象单段写入：is_eof=True 且 offset=0；分段续写需满足服务端 offset/长度校验
+ tablet.add_value_object_by_name("f2", 0, True, 0, b"seg")
+ tablet.add_value_object(1, 2, True, 0, b"second-f1")
+ tablet.add_value_object(1, 3, True, 0, b"second-f2")
+ table_session.insert(tablet)
+
+ ts_arr = np.array([300, 400], dtype=TSDataType.INT64.np_dtype())
+ np_vals = [
+ np.array(["d1", "d1"]),
+ np.array([1.0, 2.0], dtype=np.float32),
+ np.array([None, None], dtype=object),
+ np.array([None, None], dtype=object),
+ ]
+ np_tab = NumpyTablet(
+ table, column_names, data_types, np_vals, ts_arr, column_types=column_types
+ )
+ np_tab.add_value_object(0, 2, True, 0, b"np-r0-f1")
+ np_tab.add_value_object(0, 3, True, 0, b"np-r0-f2")
+ np_tab.add_value_object(1, 2, True, 0, b"np-r1-f1")
+ np_tab.add_value_object(1, 3, True, 0, b"np-r1-f2")
+ table_session.insert(np_tab)
+
+ # 分段 OBJECT：先 is_eof=False（续传），再 is_eof=True（末段）；offset 为已写入字节长度
+ chunk0 = bytes((i % 256) for i in range(512))
+ chunk1 = b"\xab" * 64
+ expected_segmented = chunk0 + chunk1
+ seg1 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg1.add_value_object(0, 2, False, 0, chunk0)
+ seg1.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg1)
+ seg2 = Tablet(
+ table,
+ column_names,
+ data_types,
+ [["d1", 3.0, None, None]],
+ [500],
+ column_types,
+ )
+ seg2.add_value_object(0, 2, True, 512, chunk1)
+ seg2.add_value_object(0, 3, True, 0, b"f2-seg")
+ table_session.insert(seg2)
+
+ with table_session.execute_query_statement(
+ f"select read_object(f1) from {table} where time = 500"
+ ) as ds:
+ assert ds.has_next()
+ row = ds.next()
+ blob = row.get_fields()[0].get_binary_value()
+ assert blob == expected_segmented
+ assert not ds.has_next()
+
+ seen = 0
+ with table_session.execute_query_statement(
+ f"select device, temp, f1, f2 from {table} order by time"
+ ) as ds:
+ while ds.has_next():
+ row = ds.next()
+ fields = row.get_fields()
+ assert fields[0].get_object_value(TSDataType.STRING) == "d1"
+ assert fields[1].get_object_value(TSDataType.FLOAT) is not None
+ for j in (2, 3):
+ raw = fields[j].value
+ assert isinstance(raw, (bytes, bytearray))
+ eof, off, body = decode_object_cell(bytes(raw))
+ assert isinstance(eof, bool) and isinstance(off, int)
+ assert isinstance(body, bytes)
+ fields[j].get_string_value()
+ fields[j].get_object_value(TSDataType.OBJECT)
+ seen += 1
+ assert seen == 5
+
+
+if __name__ == "__main__":
+ pytest.main([__file__, "-v", "-rs"])
+```